- About Us
- Product List 1
- Product List 2
- Product List 3
- Product List 4
- Contact Us
|Product : Carboxy Methyle Cellulose||Appearance : Free Flow White Powder||Packing : 25kg Paper Bags / 25 kg HDPE bags|
Carboxy methyl Cellulose is also used by various industries and widely accepted by domestic market and international market as well. Carboxymethyl Cellulose is used to synthetic resins, detergents, paints, inks, plastics, textiles, paper and cardboard, adhesive and sealants, fertilizers, wax and polishes in various products of different industries.
Carboxy methyl Cellulose is one of the best products in our company and widely globally. When we talk about the best carboxy methyl cellulose, it carries lots of quality parameter with the products and its impressive effectiveness.
To identify the best quality of Carboxylmethyl Cellulose is to check its viscosity and thickening capacity i.e. higher the viscosity of Carboxyl methyl cellulose greater will be the best quality products.
Used in ONGC:
The sodium Carboxylmethyl Cellulose is used in slurry, it forms a thin slurry and strongly permeable filter cake in the well that leads to reduce water loss even at 150° C.
Carboxylmethyl cellulose easy the gas to release from slurry
Carboxylmethyl Cellulose is also used to increase slurry stability and lifespan.
Carboxyl methyl cellulose acts as anti-pollutant for various soluble salts.
Widely used in Mining flotation Industry:
Carboxyl methyl cellulose disarticulates the metals and impurities as high purity and high potency suspending agents.
Carboxylmethyl Cellulose is a great smoothening agent and used to classify the agent in the paper industry. It increases the 40-50% strength of textile.
Carboxylmethyl cellulose act as adhesives, plasticizers, suspending agent and fixing agent.
Carboxylmethyl Cellulose used for enhancement of water retention and strength of construction.
Food industries use Carboxylmethyl Cellulose with combination of other ingredients for thickening of ice cream, for fast cooking, etc.
Widely available and low cost polymer for fluid Loss control
It is an effective at providing filtration control in most water based drilling fluids.
It is effective in low concentrations.
It is Non–Toxic.
It is not subjected to bacterial fermentation and calcium contamination.
Can be used in Most water based Fluid systems
|Degree of Substitution||0.75 min|
|Purity (%)||65 min|
|pH Value||6.0 to 8.5|
|Moisture (%)||- 10|
|Viscometer dial reading , 600 rpm||In deionized water 30 min Complied|
|In 4% Salt Water 30 min Complied|
|In Saturated Salt water 30 min Complied|
|Filtrated Loss, cm3||10 max|